A complete line of air operated pumps for oil, grease, ATF and fluids.
Digital Fluid Control System
A complete DFC system for fluid inventory control can
be built by starting with the Model 1060 Control Module
and adding the additional components (8” W x
6” D x 4” H). |
|
Digital
Fluid Control Modules
Model
1060
Directs one fluid to up to 10 different outlet station
locations. 40 watt
transformer, surge suppressor, CSA approved, 24 volt
A.C. wiring. |
|
Dual
Product Module
Model 1060-3
Directs 2 fluids to up to 6 different outlet station
locations for each
fluid. Running product total for each product. Simple
toggle switch
for product selection with indicator light for each
product. |
|
Impulse
Meter
Model 1061
1/2” inlet, measures in quarts. One per fluid pump required.
Model 1062
1/2” inlet, measures in pints. One per fluid pump required.
Model 1066
1/2” inlet, measures in litres. One per fluid pump required.
Model 1071
1/2” inlet, 100 pulse unit, for control master system only. |
|
Fluid
Solenoid
Model 1065
1/2” inlet, High Pressure, 24 VAC. One per controlled
outlet
location required.
Model 1074
1/2” 24 VDC. For w/w, anti-freeze. For Control
Master systems only. |
|
Ready
Light
Model 1068
One per controlled outlet location required. |
|
"Y"
Strainer
Model 1069
With fine mesh filter. Recommended for installing ahead
of fluid
solenoid to prevent fouling. 1/2” NPTF. |
|
Air
Solenoid
Model 1064
1/2”, 24 VAC. One per fluid pump required.
Also for use with water
base fluids. |
|
Pressure
Relief Valve
Model 1063
3/4” inlet and 1/2” outlet
Model 1070 (Not shown)
3/8” inlet and 1/4” outlet (for diaphragm
pumps only) |
|
